AltiGen MAXCS 7.0 Update 1 FXS Configuration with AudioCodes - Manual (Page 5)

Configuring Analog Extensions with AudioCodes Gateways Page 5 of 25
2. On the General tab, configure the following settings.
Figure 2: Configure IP Extension settings
3. Select PBX > AltiGen IP Phone Configuration.
4. For extension 167, clear the checkbox Enable SIP Telephony Service.
Figure 3: Disable SIP Telephony Service
5. Select VoIP > Enterprise Network Management > Codec > Codec Profile Table. Add a new profile,
“OnPremise.”
Figure 4: Create a new codec profile
• Check Enable IP Extension.
• Check Connect Voice Stream to Server. (If
you clear this checkbox, conferences will
fail.)
• Check Enable 3rd Party SIP Device.
• Enter a SIP Registration Password. We
use 5656 in this example.
• Set Codec to G.711 Mu-Law.
• Set DTMF Delivery to RFC 2833.
• Set SIP Early Media to Disable.