AltiGen MAXCS 7.0 Update 1 FXS Configuration with AudioCodes User Manual

Page 12

Configuring Analog Extensions with AudioCodes Gateways

Page 12 of 25

Select VoIP > Coders and profiles > Coders. Make sure that both G.711U-law and G.729 are in the list.

Figure 15: Confirm that G.711U-law and G.729 are listed in Coders and Profiles

10.

Select VoIP > GW and IP to IP > Hunt Group > Endpoint Phone Number. Configure Entry 1 as follows.

Figure 16: Configure the endpoint phone extension

•

Set Channel(s) to 1. (This means the first FXS port.)

•

Set Phone Number to 167 (refer to the extension in

Figure 1).

•

Set Hunt Group ID to 1.

•

Set Tel Profile ID to 0.