AltiGen MAXCS 7.0 Update 1 FXS Configuration with AudioCodes - Manual (Page 19)

Configuring Analog Extensions with AudioCodes Gateways Page 19 of 25
Figure 29: Upload the INI and DAT files
6. Submit this last change. On the toolbar, click Burn.
7. Restart the AudioCodes gateway.
The INI File
Here are the contents of the usa_tones_13_NoHold.ini file.
[NUMBER OF CALL PROGRESS TONES]
Number of Call Progress Tones=13
#Dial tone
[CALL PROGRESS TONE #0]
Tone Type=1
Tone Form =1
Low Freq [Hz]=350
High Freq [Hz]=440
Low Freq Level [-dBm]=13
High Freq Level [-dBm]=13
First Signal On Time [10msec]=200
First Signal Off Time [10msec]=0
Second Signal On Time [10msec]=0
Second Signal Off Time [10msec]=0
#Dial tone
[CALL PROGRESS TONE #1]
Tone Type=1
Tone Form =1
• For the INI file, upload “usa_tones_13_NoHold.ini"
• For the Call Progess Tones file, upload
"usa_tones_13_NoHold.dat"