Industrial Data Systems IDS 152 - Manual (Page 8)

11. STATION NUMBER (Default = OFF)
The station number is used print a station ID on each
ticket. Station numbers range from 1 to 9.
(see section 3.2.11)
12. HEADER LABEL. (Default = OFF)
The header label is used to print the company name or other
information on each ticket. The header label is up to 30
characters long. (see section 3.2.12)
2.3 THE BATTERY BACKUP FEATURES.
The battery is used for the following functions:
1. TIME AND DATE CLOCK. The battery keeps the clock running
when power is turned off.
2. TICKET NUMBERING. Automatically prints a ticket number
on each transaction. The battery keeps the number in
memory when power is turned off.
3. TOTALS.
The battery permits storage of the subtotal and total
in memory when power is turned off.
Configure the BATTERY BACKUP option to ON if any of the
battery backup functions are used. (see section 3.3)
2.4 THE BASIC PRINTER MODE (SLAVE PRINTER).
The basic printer mode is for general purpose applications. In
this mode the printer prints what is sent. This permits the
IDS152 to be used with a wide range of devices, including most
weigh-meters. The Basic Mode can be combined with the Print
Features for applications that require more than your average
basic printer. The print features are set with the thumbwheel
switch (see section 3.2) or they can be set by sending control
codes (see appendix III).
The
PRINT switch is used to output a data request signal. This
is used to activate data transmission from the 'host'.
The
AUX switch activates a paper release cycle.