Industrial Data Systems IDS 152 - Manual (Page 17)

3.2.6 CONFIGURATION: INVERT PRINT.
1. Begin with the ENTER light OFF.
2. Turn the thumbwheel switch to position 1.
3. Press the ENTER switch. The ENTER light begins flashing.
4. Turn the thumbwheel switch to position 6.
5. Press the ENTER switch. The ENTER light turns on.
6. Turn the thumbwheel switch to position:
0 for INVERT PRINT --- OFF
1 for INVERT PRINT --- ON
7. Press the ENTER switch. The ENTER light turns off.
SET INVERT PRINT
FLASH ON OFF (Enter Light)
Set Normal Print 1 6 0 (Thumbwheel Switch)
Set Invert Print 1 6 1 (Thumbwheel Switch)
3.2.7 CONFIGURATION: INHIBIT PRINT IF PAPER EMPTY.
1. Begin with the ENTER light OFF.
2. Turn the thumbwheel switch to position 1.
3. Press the ENTER switch. The ENTER light begins flashing.
4. Turn the thumbwheel switch to position 7.
5. Press the ENTER switch. The ENTER light turns on.
6. Turn the thumbwheel switch to position:
0 for INHIBIT PRINT IF PAPER EMPTY --- OFF
1 for INHIBIT PRINT IF PAPER EMPTY --- ON
7. Press the ENTER switch. The ENTER light turns off.
SET INHIBIT PRINT IF PAPER EMPTY
FLASH ON OFF (Enter Light)
Inhibit Print OFF 1 7 0 (Thumbwheel Switch)
Inhibit Print ON 1 7 1 (Thumbwheel Switch)
REMEMBER: Return the thumbwheel switch to the correct mode
postition after configuration.