Industrial Data Systems IDS 152 User Manual
Page 15
3.2.2 CONFIGURATION: AUTOMATIC PAPER RELEASE.
1. Begin with the ENTER light OFF.
2. Turn the thumbwheel switch to position 1.
3. Press the ENTER switch. The ENTER light begins flashing.
4. Turn the thumbwheel switch to position 2.
5. Press the ENTER switch. The ENTER light turns on.
6. Turn the thumbwheel switch to position:
0 for AUTO PAPER RELEASE --- OFF
1 for AUTO PAPER RELEASE --- ON
7. Press the ENTER switch. The ENTER light turns off.
SET AUTO PAPER RELEASE
FLASH ON OFF (Enter Light)
Auto Release OFF 1 2 0 (Thumbwheel Switch)
Auto Release ON 1 2 1 (Thumbwheel Switch)
3.2.3 CONFIGURATION: PRINT WRAP.
1. Begin with the ENTER light OFF.
2. Turn the thumbwheel switch to position 1.
3. Press the ENTER switch. The ENTER light begins flashing.
4. Turn the thumbwheel switch to position 3.
5. Press the ENTER switch. The ENTER light turns on.
6. Turn the thumbwheel switch to position:
0 for PRINT WRAP --- OFF
1 for PRINT WRAP --- ON
7. Press the ENTER switch. The ENTER light turns off.
SET PRINT WRAP
FLASH ON OFF (Enter Light)
Print Wrap OFF 1 3 0 (Thumbwheel Switch)
Print Wrap ON 1 3 1 (Thumbwheel Switch)
REMEMBER: Return the thumbwheel switch to the correct mode
postition after configuration.