Yamaha YSP-1100 User Manual
Oyamaha
Table of contents
Document Outline
- Explanation of Graphical Symbols
- CAUTION: READ THIS BEFORE OPERATING THIS UNIT.
- CONTENTS
- OVERVIEW
- FEATURES
- USING THIS MANUAL
- Notes
- 1 Install this unit In your listening room.
- 2 Connect this unit to your TV and other external components.
- 3 Prepare the remote control and turn on the power of this unit.
- 4 Run AUTO SETUP.
- 5 Play back a source.
- 6 Change the beam modes and/or CINEMA DSP settings.
- 7 Run MANUAL SETUP to fine-tune settings and/or set remote control codes.
- Notes
- SUPPLIED ACCESSORIES
- CONTROLS AND FUNCTIONS
- Front pane!
- Front panel display
- Rear panel
- © RS-232C/REMOTE IN terminals
- © DVD COAXIAL DIGITAL IN jack
- © AUX OPTICAL DIGITAL IN Jack
- © TV/STB OPTICAL DIGITAL IN jack
- © TV/STB AUDIO IN jacks
- ® VCR AUDIO IN jacks
- © SUBWOOFER jack
- © VCR VIDEO IN jack
- ® DVD/AUX VIDEO IN jack
- ® DVD/AUX COMPONENT VIDEO IN jacks
- ® STB VIDEO IN jack
- ® STB COMPONENT VIDEO IN jacks
- ® VIDEO OUT jack
- ® COMPONENT VIDEO OUT jacks
- ® IR-OUT terminal
- ® AC IN
- Remote control
- 0 Infrared window
- (2) STANDBY/ON
- (3) Transmission indicator
- 0 Input selector buttons
- ® VOL MODE
- ® AUTO SETUP
- ® Numeric buttons
- ® STEREO
- ® Sound field program buttons
- ® CH LEVEL
- ® Cursor buttons ^ / Yz / <] / |>, ENTER
- © TEST
- ® VOLUME+/-
- ® MUTE
- © TV INPUT
- ® DVD playerA^CR control buttons
- © My beam microphone
- ® TV POWER
- ® AV POWER
- @ INPUT1/INPUT2
- (g) MACRO
- ® SLEEP
- @ INPUTMODE
- (g) Beam mode buttons
- @ SURROUND
- (g) MY BEAM
- @ TruBass
- @) MENU
- (g Operation mode selector
- @ RETURN
- (g) TVVOL+/-
- ® CH+/-
- ® TV MUTE, CODE SET
- INSTALLATION
- CONNECTIONS
- GETTING STARTED
- USING SET MENU
- CHANGING OSD LANGUAGE
- AUTO SETUP (IntellìBeam)
- The flow Chari of AUTO SETUP
- Installing the optimizer microphone
- Using AUTO SETUP (InlelllBeam)
- ■ Assembling the supplied cardboard microphone stand
- Notes
- 1 Press STANDBY/ON on the front panel or on the remote control to turn on the power of this unit.
- 3 Press MENU on the remote control.
- Press ^ ^ on the remote control to select AUTO SETUP and then press ENTER.
- Set the operation mode selector to YSP to switch to the operation mode of this unit.
- Check that the following screen is displayed on your TV.
- 10 Disconnect the optimizer microphone from the OPTIMIZER MIC jack on the front panel.
- Press ENTER to confirm the results or press RETURN to cancel the results.
- ■ Error messages for AUTO SETUP Before the AUTO SETUP procedure starts
- While the AUTO SETUP procedure is in progress
- Notes
- ■ Assembling the supplied cardboard microphone stand
- USING THE SYSTEM MEMORY
- Convenient usage of the system memory
- Loading settings
- 1 Set the operation mode selector to YSP to switch to the operation mode of this unit.
- 2 Press MENU on the remote controi.
- 6 Press ENTER again.
- 7 Press MENU to exit.
- 3 Press ^ ^ to select MEMORY and then press ENTER.
- 4 Press to select LOAD and then press
- ENTER.
- 6 Press ENTER again.
- 5 Press ^ / xz to select MEMORY1, MEMORY2 or MEMORY3 and then press ENTER.
- 7 Press MENU to exit.
- PLAYBACK
- ENJOYING SURROUND SOUND
- Note
- 5 beam
- Stereo plus 3 beam
- Steam
- Enjoying 2~channei sources in surround sound
- Adfusting surround mode parameters
- ENJOYING STEREO SOUND
- PLAYING BACK SOUND CLEARLY (My beam)
- USING SOUND FIELD PROGRAMS
- USING THE VOLUME MODE (Night listening mode/TV volume equal mode)
- USING BASS SOUND ENHANCER (TruBass)
- USING THE SLEEP TIMER
- Set the operation mode selector to YSP to switch to the operation mode of this unit.
- Press SLEEP on the remote control repeatedly to set the amount of time for the sleep timer.
- 3 Wait for a few seconds without operating this unit to confirm the setting for the sleep timer.
- ^ I ^
- Canceling the sleep timer
- MANUAL SETUP
- SOUND MENU
- BEAM MENU
- INPUT MENU
- DISPLAY MENU
- Using MANUAL SETUP
- BEAM MENU
- ■ SETTING PARAMETERS (Setting parameters)
- ■ BEAM ADJUSTMENT (Beam adjustment)
- ■ IMAGE LOCATION (Image location)
- ■ TONE CONTROL (Tone control)
- SUBWOOFER SET (Subwoofer set)
- ■ MUTE LEVEL (Muting level)
- ■ AUDIO DELAY (Audio delay)
- ■ ROOM EQ (Room equalizer)
- ■ DD/DTS Dynamic Range
- (Dynamic range of Doiby Digitai and DTS signais)
- ■ INPUT ASSIGNMENT (Input assignment)
- ■ INPUT MODE (Input mode)
- ■ INPUT TRIM (Input trim)
- ■ INPUT RENAME (Input rename)
- ■ DIMMER SET (Dimmer settings)
- ■ OSD SET (OSD settings)
- ■ UNIT SET (Unit settings)
- ADJUSTING THE AUDIO BALANCE
- SELECTING THE INPUT MODE
- ADJUSTING SYSTEM PARAMETERS
- REMOTE CONTROL FEATURES
- Setting remote control codes
- Controlling other components
- ■ Operating your TV
- Set the operation mode selector to TV/AV and then press TV to select TV as the input source.
- © TV POWER
- © TVINPUT1/2
- @ Numeric buttons
- ® CH+/-
- ® TVVOL+/-
- ® TV MUTE
- © TV INPUT
- ® AV POWER
- © Numeric buttons
- @ MENU
- ® Cursor buttons ^ / <] / t>, ENTER
- © RETURN
- © Operation buttons for DVD and VCR players
- Set the operation mode selector to TV/AV and then press VCR to select VCR as the Input source.
- ■ Operating your STB (CATV/Satellite tuner)
- ■ Operating your TV
- Using the TV macro
- TROUBLESHOOTING
- GLOSSARY
- SPECIFICATIONS
- ^YAMAHA
- YSP-nOO