Using the audio output being piayerback, Using the audio output being player back – Yamaha YSP-1100 User Manual
Page 77
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ADJUSTING THE AUDIO BALANCE
5
Press TEST when you have completed all
your adjustments.
Notes
• All the channel levels cannot be adjusted when the stereo
playback or my beam is selected as the beam mode (see
pages 47 and 48).
• FRONT L/R cannot be adjusted when the stereo plus 3 beam is
selected as the beam mode (see page 43).
• FRONT L/R are automatically adjusted depending on the
settings of the other channels when the stereo plus 3 beam or
stereo playback is selected as the beam mode (see pages 43 and
47).
If the level of a particular channel cannot be adjusted, —dB
appears in the front panel display.
Using the audio output being
piayerback
You can also manually adjust the channel levels while
playing back an input source such as a DVD.
U
1
Set the operation mode selector to YSP to
switch to the operation mode of this unit.
TV/A^_
h
2
Press CH LEVEL repeatedly (or press
CH LEVEL and then ^ to select the
channel you want to adjust.
The front panel display changes as follows.
■FRONT L +l,0dB
t
CENTER -2.5dB
1
FRONT R +1.0dB
i
SUR. R. +2.0dB
i
SUR. L
+2.
0dB
■SljJFR —dB
73
En