Yamaha YSP-1100 - Manual (Page 21)

CONNECTIONS
Connecting a DVD player/recotder
Connect a DVD player/recorder and enjoy DVDs.
■ Audio connections
Connect the optical digital output jack of your DVD
player/recorder to the DVD COAXIAL DIGITAL IN jack
of this unit. In case you connect this unit to a DVD/VCR
combo player/recorder, connect the analog audio output
jacks of your DVD/VCR combo player/recorder to the
VCR AUDIO IN jacks of this unit in addition to the
optical digital audio connection.
■ Video connections
Connect the video output jack of your DVD player/
recorder to the DVD/AUX VIDEO IN jack of this unit. If
your DVD player/recorder has component video output
jacks, connect the component video output jacks of your
DVD player/recorder to the DVD/AUX COMPONENT
VIDEO IN jacks of this unit. Once the component video
connection is made, you can enjoy images with better
resolution.
To prevent the potical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 15).
Notes
• Check that your DVD player/recorder is properly set to output Dolby Digital and DTS digital audio signals. If not, adjust the system
settings of your DVD player/recorder. For details, refer to the operation manual supplied with your DVD player/recorder.
• If your DVD player/recorder does not have a coaxial digital output jack, make an optical digital audio connection instead
(see page 21).
Cables used for audio connections
Audio pin cable
(White)
(Red)
Digital audio pin cable (supplied)
(Orange)
ih
Cables used for video connections
Video pin cable
(White)
(Red)
Component video pin cable
(Green) ....... |||......iHj (Green)
(Orange) (Blue) czl' Mlii-l—j^ M h IIIII ■ N (Blue)
(Red) c NQKIM LlJI H i y (Red)
17 £n