Yamaha YSP-1100 User Manual

Page 37

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

AUTO SETUP (Intelli Beam)

Press ^ to select BEAM+SOUND

OPTIMZ, BEAM OPTIMZ only or SOUND
OPTIMZ only and then press ENTER.
The following screen appears on your TV.

BEAM+SOUND OPTIMZ
(Beam optimization and sound optimizaiton)

Use to optimize the beam angle, delay, volume and quality
so that the parameters best match your listening
environment.
It is recommended that you should select this optimization
feature in the following cases:
• If you make settings for the first time.
• If the unit has been relocated.
• If your listening room has been restructured.
• If the objects in your listening room (furniture, etc.)

have been rearranged.

This menu takes about 3 minutes.

BEAM OPTIMZ only

(Beam optimization only)
Use to optimize the beam angle so that the parameter best
matches your listening environment.
This menu takes about 1 minute.

SOUND OPTIMZ only
(Sound optimization only)
Use to optimize the beam delay, volume and quality so
that the parameters best match your listening environment.
It is recommended that you should select this optimization
feature in the following cases:
• If you have opened or closed the curtains in your

listening room before using this unit.

• If you have manually set the beam angle.
This menu takes about 2 minutes.

NotB

You must optimize the beam angle in the BEAM OPTIMZ only
procedure before starting the SOUND OPTIMZ only procedure.

Check the following points once again before
starting the AUTO SETUP procedure.
• Is the optimizer microphone firmly connected to

this unit?

• Is the optimizer microphone placed in a proper

location?

• Are there any large obstacles in between the

optimizer microphone and the walls in your
listening room?

Press ENTER to start the AUTO SETUP
procedure.

The following screen appears on your TV and the
AUTO SETUP procedure starts in 10 seconds.
Evacuate yourself from your listening room before
starting the AUTO SETUP procedure.

WILL BEGIN in 10SEC

Please leaue the roor'i.

[RETURN]¡Cancel

If an error occurs, an error buzzer is played and an
error message is displayed. See “Error messages for
AUTO SETUP” on page 35 for a complete list of
error messages and their proper remedies. Follow the
instructions and perform the AUTO SETUP
procedure again.