Adjusting the audio balance, Using the test tone, 2 press test on the remote control – Yamaha YSP-1100 User Manual
Page 76: 4 press <| / [> to adjust channel volumes, Test from, 72 en
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ADJUSTING THE AUDIO BALANCE
You can adjust the sound beam output level of each channel by using the test tone or the audio output being played back
in each beam mode to achieve a more true-to-life surround sound experience.
Using the test tone
You can use the test tone feature to output a test tone from
each channel to manually balance the channel levels.
Use the test tone to set channel levels so that the volume
level of each channel is identical when heard from your
listening position.
1
Set the operation mode selector to YSP to
switch to the operation mode of this unit.
TV/AV
VS?
H
2
Press TEST on the remote control.
TEST FRONT L appears in the front panel display
and a test tone is output from the front left channel.
TEST FROm
T* /
3
Press ^ ^ to select the channel you want
to adjust.
The front panel display changes as follows.
►
TEST FRONT L
TEST CENTER
TEST FRONT R
i
TEST SUR. R
i
TEST SUR.L
>—
TEST SljJFR
Note
TEST SWFR is only available when a subwoofer is connected to
this unit and SWFR is selected for BASS OUT in SOUND
MENU (see page 67).
4
Press <| / [> to adjust channel volumes.
Control range: -10 dB to +10 dB
72 En