Using the tv macro, Notes – Yamaha YSP-1100 User Manual

Page 88

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

REMOTE CONTROL FEATURES

Using the TV macro

The TV macro feature makes it possible to perform a
series of operations with the press of a single button. For
example, when you want to play a DVD, you would
normally turn on the component, select DVD as the input

source and press the play button to start playback. The TV

macro feature lets you perform all of these operations
simply by pressing the DVD macro button.

Notes

• Be sure to set up a remote control code for your TV before

setting macros.

• The ways to set macros differ if your TV does not have the

tuning capability.

• If you press any control buttons on the remote control other than

the ones used to set macros while setting macros, the setting
procedure is automatically canceled.

• If it takes more than 10 seconds in steps 2 and 3, the setting

procedure is automatically canceled. In this case, repeat from

step 1.

Setting macros for the TV with the

tuning capabiiity

Press and hold CODE SET on the remote

control and then press one of the input

selector buttons to select the input source

you want to set macros for.

Proceed to step 2 while holding down CODE SET.

TV MUTE

I ST

J I VCR.1 I DVD.J | AUxJ

While holding

-----

Y )

--------

Y " )

------

down, press

CODE SET\

Q...,

I c

Press MACRO on the remote control while

holding down CODE SET.

TV MUTE

MACRO

While holding

down, press

Press CH +/- or the numeric buttons to select

the TV channel.

Check that the TV screen changes to the tuner screen.

5BEAM ST+3BEAM 3BEAM

Q Q Q

STEREO MY BEAM SURROUND

Q H fi

I SPORTS

Press TV INPUT on the remote control

repeatedly so that the screen changes to the

display of the input source selected in step 1.

Press ENTER on the remote control to

confirm the macro setting.