Brother HL-1060 - Manual (Page 75)

CHAPTER IV -11
I-8 Black vertical streaks (in the gray background)
Possible cause Step Check Result Remedy
Translucent
stain on the
scanner window 1 Are there any stains? Yes Clean the scanner window.
If it is not effective, replace the
scanner unit.
I-9 White vertical streaks
Possible cause Step Check Result Remedy
Scanner window
dirty 1 Is the scanner window dirty? Yes Clean the scanner window with
a dry tissue.
Transfer failure 2 Is the transfer roller scratched? Yes Replace the drum unit.
I-10 Faulty registration
Possible cause Step Check Result Remedy
Excessive paper
load 1 Is the paper loaded in the paper
feeder more than 22mm deep? Yes Instruct the user to keep paper
loads below 22mm in depth.
Print paper 2 Is the specified weight of the
recommended paper being
used? No Instruct the user to use the
recommended types of paper.
Ditto 3 Is the first printing position
within ±1mm of the tolerance
specification? Yes Adjust the Y offset by using the
utility software supplied.
Paper resist
sensor position
incorrect 4 Is the position of the paper
resist sensor normal? No Reposition the sensor to the
correct position.