American Fibertek SM8P-SFP User Manual
Page 96

Rev.A1
18-May-11
88
Parameter description:
QCL#:
QCL number : 1~8
QCE Type:
Ethernet Type / VLAN ID / UDP/TCP Port / DSCP / ToS / Tag Priority
Ethernet Type Value:
The configurable range is 0x600~0xFFFF. Well known protocols already
assigned EtherType values. The commonly used values in the EtherType
field and corresponding protocols are listed below:
Ethertype
(Hexadecimal)
Protocol
0x0800
IP, Internet Protocol
0x0801
X.75 Internet
0x0802
NBS Internet
0x0803
ECMA Internet
0x0804
Chaosnet
0x0805
X.25 Level 3
0x0806
ARP, Address Resolution Protocol.
0x0808
Frame Relay ARP [RFC1701]
0x6559
Raw Frame Relay [RFC1701]
0x8035
DRARP, Dynamic RARP. RARP, Reverse
Address Resolution Protocol.
0x8037
Novell Netware IPX
0x809B
EtherTalk (AppleTalk over Ethernet)
0x80D5
IBM SNA Services over Ethernet
0x 80F3
AARP, AppleTalk Address Resolution
Protocol.
0x8100
IEEE Std 802.1Q - Customer VLAN Tag Type.
0x8137
IPX, Internet Packet Exchange.
0x 814C
SNMP, Simple Network Management
Protocol.
0x86DD
IPv6, Internet Protocol version 6.
0x880B
PPP, Point-to-Point Protocol.
0x 880C
GSMP, General Switch Management