American Fibertek SM8P-SFP - Manual (Page 318)

Rev.A1
18-May-11 286
To set per-port maximum frame size
Argument:
syntax : 1,5-7, available from 1 to 8
: Allowed value are 1518-9600 bytes.
Possible value:
syntax : 1 to 8
: 1518-9600 bytes.
Example:
SM8P-SFP(port)# set max-frame 3-6 1518 SM8P-
SFP(port)# show config
Speed/ Flow Maximum Excessiveommands
2 Auto Disabled 9600 Discard
3 Auto Enabled 1518 Discard salesdepartment
4 Auto Enabled 1518 Discard salesdepartment
5 Auto Enabled 1518 Discard salesdepartment
6 Auto Enabled 1518 Restart salesdepartment
7 Auto Enabled 9600 Restart salesdepartment
8 Auto Enabled 9600 Restart salesdepartment
set speed
Syntax:
set speed Description:
To set port capability.
Argument:
:syntax 1,5-7, available from 1 to 8
:
auto: set auto-negotiation mode
10half: set speed/duplex 10M Half
10full: set speed/duplex 10M Full
100half: set speed/duplex 100M Half
100full: set speed/duplex 100M Full
1Gfull: set speed/duplex 1G Full
Possible value:
: 1 to 8
: auto, 10half, 10full, 100half, 100full, 1Gfull
Example:
SM8P-SFP(port)# set speed 3 auto SM8P-
SFP(port)# show status
Speed/
Port Link Duplex Rx Pause Tx Pause Description
---- ---- --------- -------- -------- --------------------------------
1 Up 100M/Full Disabled Disabled
2 Down Down Disabled Disabled
3 Up 100M/Full Disabled Disabled
4 Down Down Disabled Disabled
5 Down Down Disabled Disabled