American Fibertek SM8P-SFP - Manual (Page 334)

Rev.A1
18-May-11 296
: available from 1 to 12
Example:
SM8P-SFP(qos-qcl)# delete 2 1
<>
set
Syntax:
set
Description:
To set rate limit configuration
Argument:
: 1,5-7, available from 1 to 8
: 1 means enable and 0 means disable
: allowed values are 500kbps-1Gkps
: 'k' means kbps and 'm' means mbps
: 1 means enable and 0 means disable
: allowed values are 500kbps-1Gkps
: 'k' means kbps and 'm' means mbps
Possible value:
range syntax: 1,5-7, available from 1 to 8
policer enabled: 1 means enable and 0 means disable
rate: allowed values are 500kbps-1Gkps
unit: 'k' means kbps and 'm' means mbps
shaper enabled: 1 means enable and 0 means disable
rate: allowed values are 500kbps-1Gkps
unit: 'k' means kbps and 'm' means mbps
Example:
SM8P-SFP(qos-rate)# set 2 1 1000 m 1 1000 m
SM8P-SFP(qos-rate)#show
2 V 1000 Mbps V 1000 Mbp
s 3 500 kbps 500 kbps
4 500 kbps 500 kbps
5 500 kbps 500 kbps
6 500 kbps 500 kbps
7 500 kbps 500 kbps
8 500 kbps 500 kbps
<< storm >>
set broadcast
Syntax:
set broadcast
Description:
To set broadcast storm control configuration