American Fibertek SM8P-SFP User Manual
Page 16

Rev.A1
18-May-11
8
• Maximal packet length can be up to 9600 bytes for jumbo frame application
• Supports DHCP Broadcasting Suppression to avoid network suspended or
crashed
• Supports to send the trap event while monitored events happened
• Supports Link Layer Discovery Protocol (LLDP)
• Supports default configuration which can be restored to overwrite the current
configuration which is working on via web browser and CLI
• Supports on-line plug/unplug SFP modules
• Supports Quality of Service (QoS) for real time applications based on the
information taken from Layer 2 to Layer 4, such as VoIP
• Built-in web-based management and CLI management, providing a more
convenient UI for the user
• Supports port mirror function with ingress/egress traffic
• Supports rapid spanning tree (802.1w RSTP)
• Supports multiple spanning tree (802.1s MSTP)
• Supports SSL/SSH supports the encryption for all transmitted data for secure
• Supports ease switch management security administration by using a password
with Cisco TACACS+ authentication server
• Supports 802.1X port security on a VLAN
• Supports IP-MAC-Port Binding for LAN security
• Supports user management and only first login administrator can configure the
device. The rest of users can only view the switch
• SNMP access can be disabled and prevent from illegal SNMP access
• Supports Ingress, Non-unicast and Egress Bandwidth rating management with
a resolution of 1Mbps
• The trap event and alarm message can be transferred via e-mail
• Supports diagnostics to let administrator knowing the hardware status
• Supports loop detection to protect the switch crash when the networking has
looping issue
• HTTP and TFTP for firmware upgrade, system log upload and configuration file
import/export
• Supports remote boot the device through user interface and SNMP
• Supports NTP network time synchronization and daylight saving
• Supports 120 event log records in the main memory and display on the local
console
•
Supports Syslog a standard for logging program messages and allows
separation of the software that generates messages from the system