American Fibertek SM8P-SFP - Manual (Page 116)

Rev.A1
18-May-11 106
Function name:
Trap Hosts Configuration
Function description:
The function is used to configure SNMP trap. To create a new trap account,
please check button, and enter the trap information then check
. Max Group Number : 6.
Fig. 3-63-8 The Trap Hosts setting
Parameters description:
Delete:
Fig. 3-63-9 The Trap Hosts setting
Check entry then check button, the entry will be delete.
Version:
You may choose v1, v2c or v3 trap.
IP:
SNMP Host IP address.