American Fibertek SM8P-SFP - Manual (Page 301)

275 Rev.A1
18-May-11
Argument:
: available from 6 to 40. Recommended value is 20
: available from 4 to 30. Recommended value is 15
: available from 6 to 40. Recommended value is 20
Possible value:
: available from 6 to 40. Recommended value is 20
: available from 4 to 30. Recommended value is 15
: available from 6 to 40. Recommended value is 20
Example:
SM8P-SFP(mstp)# set config 20 15 20 SM8P-
SFP(mstp)#
set msti-vlan
Syntax:
set msti-vlan
Description:
To map Vlan ID(s) to an MSTI
Argument:
: MSTI id available from 1 to 4095
: syntax example: 2.5-7.100-200
Possible value:
: available from 1 to 4094
Example:
SM8P-SFP(mstp)# set msti-vlan 2 2.5
msti 2 had been successfully created and(or)
vlan(s) have been added to map to this msti.
SM8P-SFP(mstp)#
set p-cost
Syntax:
set p-cost
Description:
To set port path cost per instance
Argument:
syntax: 1,5-7, available from 1 to 8
: 0, 1-200000000. The value zero means auto status
Possible value:
: available from 1 to 8
: The value zero means auto status, 0-2000000000
Example:
SM8P-SFP(mstp)# set p-cost 2 6-8 0 SM8P-
SFP(mstp)#
set p-edge
Syntax: