American Fibertek SM8P-SFP - Manual (Page 10)

Rev.A1
18-May-11 2
1. Introduction
1-1. Overview of SM8P-SFP
SM8P-SFP, 6-Port 100/1000 Dual Speed SFP + 2-Port RJ-45/100/1000
SFP Managed Switch, is a standard switch that meets all IEEE 802.3/u/x/z Gigabit
Ethernet specifications. The switch can be managed through RJ-45 console port via
directly connection, or through Ethernet port using CLI or Web-based management
unit, associated with SNMP agent. With the SNMP agent, the network administrator
can logon the switch to monitor, configure and control each port’s activity in a
friendly way. The overall network management is enhanced and the network
efficiency is also improved to accommodate high bandwidth applications. In addition,
the switch features comprehensive and useful function such as ACL, IP-MAC
Binding, DHCP Option 82, QoS (Quality of Service), Spanning Tree, VLAN, Port
Trunking, Bandwidth Control, Port
Security, SNMP/RMON, IGMP Snooping
capability via the intelligent software. It is suitable for both metro-LAN and office
application.
Others the switch increase support the Power saving for reduce the power
consumption with "ActiPHY Power Management" and "PerfectReach Power
Management" two technique.It could efficient saving the switch power with auto
detect the client idle and cable length to provide different power.
In this switch, Port 7 and Port 8 include two types of media --- TP and
(100/1000M) SFP Fiber (LC, BiDi LC…); this port supports 10/100/1000Mbps TP or
100/1000 Dual Speed SFP Fiber with auto-detected function. (100/1000M) SFP
Fiber transceiver is used for high-speed connection expansion
 1000Mbps LC, Multi-Mode, SFP Fiber transceiver
 1000Mbps LC, 10km, SFP Fiber transceiver
 1000Mbps LC, 30km, SFP Fiber transceiver
 1000Mbps LC, 50km, SFP Fiber transceiver
 1000Mbps BiDi LC, 20km, 1550nm SFP Fiber WDM transceiver
 1000Mbps BiDi LC, 20km, 1310nm SFP Fiber WDM transceiver
 100Base-FX FE SFP Fiber Module, LC Multi-Mode
 100Base-FX FE SFP Fiber Module, LC Single-Mode 20km
10/100/1000Mbps TP is a standard Ethernet port that meets all IEEE
802.3/u/x/z Gigabit, Fast Ethernet specifications. (100/1000M) SFP Fiber
transceiver is a Gigabit Ethernet port that fully complies with all IEEE 802.3z and
1000Base-SX/LX standards and 100-FX standards.
1000Mbps Single Fiber WDM (BiDi) transceiver is designed with an optic
Wavelength Division Multiplexing (WDM) technology that transports bi-directional
full duplex signal over a single fiber simultaneously.
For upgrading firmware, please refer to the Section 3-21 or Section 4-2-2 for
more details. The switch will not stop operating while upgrading firmware and after
that, the configuration keeps unchanged.
The switch also supports the IEEE Standard
─ ─ 802.1AB （ Link Layer
Discovery Protocol
），Provide more easy debug tool and enhance the networking
management availability, Others it can provide auto-discovery device and topology