American Fibertek SM8P-SFP User Manual
Page 148

Rev.A1
18-May-11
138
Controls datagram fragmentation together with the identification
field. The flags indicate whether the datagram may be fragmented,
whether the datagram is fragmented, and whether the current
fragment is the final one.
Range: Any / Yes / No
Any: Including all IP fragment case
Yes: The ingress frame is fragmented packet
No: The ingress frames is not fragmented packet
IP Option:
A list of optional specifications for security restrictions, route
recording, and source routing. Not every datagram specifies an
options field.
Range: Any / Yes / No
Any: Including all IP option case
Yes: The ingress frame is specified IP options
No: The ingress frame is not specified IP options
SIP Filter: (SIP Source IP Address)
Range: Any / Host / Network
Any: Including all source IP address
Host: Only one specific source host IP address
Network: A specific IP subnet segment under the source IP mask
SIP Address:
Default: 192.168.1.77
SIP Mask:
Default: 255.255.255.0
DIP Filter: (DIP Destination IP Address)
Range: Any / Host / Network
Any: Including all destination IP address
Host: Only one specific destination host IP address
Network: A specific IP subnet segment under the destination IP
mask
DIP Address:
Default: 192.168.1.254
DIP Mask:
Default: 255.255.255.0
VLAN Parameters:
VLAN ID Filter:
Range: Any / Specific
Any: Including all VLAN IDs
Specific: According to following VLAN ID and Tag Priority setting for