IEI Integration SRM_121_150 v1.11 - Manual (Page 97)

SRM-121/SRM-150 LCD Monitor
Page 83
Auto-Dimming Configurations are described below.
Light Enable
ON/OFF
Turn on or turn off auto-dimming function. When auto-dimming
is turned on, the auto-dimming LED on the OSD panel is on
and the monitor automatically adjusts the brightness according
to ambient light conditions.
Light Max
Adjusts the maximum LCD brightness value. The value is from
0% to 100%. The value cannot be smaller than the minimum
LCD brightness value.
Light Min
Adjusts the minimum LCD brightness value. The value is
among 0% to 100%. The value cannot be larger than the
maximum LCD brightness value.
LUX Max
Adjusts the maximum LUX. The value is from 0 to 400 (40,000
LUX). The value cannot be smaller than the minimum LUX.
LUX Min
Adjusts the minimum LUX. The value is from 0 to 400 (40,000
LUX). The value cannot be larger than the maximum LUX.
6.2.6.3 Changing the Default Settings
The maximum and minimum LUX value and backlight brightness in the OSD panel can be
adjusted to meet custom needs and lighting conditions.
NOTE:
When the auto dimming function is on, the “Brightness Control” in
main display feature (refer to Section 6.2.1) is not effective. The user can
only adjust the maximum and minimum value of the LUX and backlight to
make the LCD brighter or darker.
Light Max. and Light Min.