IEI Integration SRM_121_150 v1.11 - Manual (Page 70)

SRM-121/SRM-150 LCD Monitor
Page 56
Step 4: Use the jumper(s) to set the correct voltage input. (See Section 4.3.2) Replace
the rear panel.
Step 5: Replace all removed screws. Step 0:
5.4 Connectors
Table 5-1 lists the external peripheral interface panel connectors for the SRM series
industrial monitors.
SRM-121 SRM-150
VGA Yes Yes
DVI-D Yes Yes
Power (12V Jack) Yes Yes
Power (9 ~ 36V) GMS model only GMS model only
RS-232 Touch Panel T-R model only T-R model only
USB Touch Panel USB/T-R model only USB/T-R model only
Table 5-1: External Peripheral Interface Connectors