IEI Integration PPC-WIDS-51xxA-G41 - Manual (Page 85)

PPC-51xxA-G41/WIDS-51xA-G41 Panel PC
Page 73
Enhanced D EFAULT Configures the on-board ATA/IDE controller to be in
Enhanced mode. In this mode, IDE channels and SATA
channels are separated. This mode supports up to 6
storage devices. Some legacy OS do not support this
mode.
Configure SATA as [IDE]
Use the Configure SATA as option to configure SATA devices as normal IDE devices.
IDE D EFAULT Configures SATA devices as normal IDE device.
RAID Configures SATA devices as normal RAID device.
AHCI Configures SATA devices as normal AHCI device.
Configure SATA Channels [Before PATA]
Use the Configure SATA Channels option to determine how SATA channels and PATA
channels are ordered.
Before PATA D EFAULT Puts SATA channels before PATA channels.
Behind PATA Puts SATA channels behind PATA channels.
IDE Master and IDE Slave
When entering setup, BIOS automatically detects the presence of IDE devices. BIOS
displays the status of the automatically detected IDE devices. The following IDE devices
are detected and are shown in the IDE Configuration menu:
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Third IDE Master
Third IDE Slave