9 at/atx mode selection, At/atx, Election – IEI Integration PPC-WIDS-51xxA-G41 User Manual

Page 65: Ctivating the, Ront, Onnectors, Wids, Eries, Figure 4-24: at/atx power switch selection

PPC-51xxA-G41/WIDS-51xA-G41 Panel PC

Page 53

4.9 AT/ATX Mode Selection

AT and ATX power modes can both be used on the PPC-51xxA-G41/WIDS-51xA-G41 flat

panel PC. The selection is made through an AT/ATX switch on the I/O interface panel.

The switch is shown below.

Figure 4-24: AT/ATX Power Switch Selection

4.10 Activating the Front USB Connectors (WIDS Series Only)

A USB switch on the I/O panel of the WIDS-51xA-G41 activates the two USB connectors

on the front panel. To access the USB connectors and activate the connectors, please do

the following:

Step 1:

Open the cover. The USB connectors are secured to the front panel of the

WIDS-51xA-G41 with two retention screws. Remove these screws.