Figure 4-6: hdd sata connector, Figure 4-7: hdd retention screws – IEI Integration PPC-WIDS-51xxA-G41 User Manual

Page 54

PPC-51xxA-G41/WIDS-51xA-G41 Panel PC

Page 42

Figure 4-6: HDD SATA Connector

Step 4:

Attach the hard drive in the bracket. To do this, slide the hard drive onto the

bracket until it connects with the SATA connector at the back. Fasten the four

retention screws on the side.

Figure 4-7: HDD Retention Screws

Step 5:

Install the hard drive bracket (with hard drive and SATA cable attached) into the

PPC-51xxA-G41/WIDS-51xA-G41 and fasten the four hard drive bracket

screws.

Step 0: