IEI Integration PPC-WIDS-51xxA-G41 - Manual (Page 41)

PPC-51xxA-G41/WIDS-51xA-G41 Panel PC
Page 29
3.1 Anti-static Precautions
WARNING!
Failure to take ESD precautions during the installation of the
PPC-51xxA-G41/WIDS-51xA-G41 may result in permanent damage to
the PPC-51xxA-G41/WIDS-51xA-G41 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the PPC-51xxA-G41/WIDS-51xA-G41. Dry climates are especially susceptible to
ESD. It is critical that the following anti-static precautions are strictly adhered to whenever
handling the PPC-51xxA-G41/WIDS-51xA-G41 or any other electrical component.
Wear an anti-static wristband - Wearing a simple anti-static wristband can
help to prevent ESD from damaging the PPC-51xxA-G41/WIDS-51xA-G41.
Self-grounding - Touch a grounded conducting material before handling and
periodically while handling the PPC-51xxA-G41/WIDS-51xA-G41.
Use an anti-static pad - When configuring the
PPC-51xxA-G41/WIDS-51xA-G41, place it on an antic-static pad to reduce
the possibility of ESD damage.
Only handle the edges of the PPC-51xxA-G41/WIDS-51xA-G41 - When
handling the PPC-51xxA-G41/WIDS-51xA-G41, hold it by its edges.
3.2 Unpacking Precautions
When the PPC-51xxA-G41/WIDS-51xA-G41 is unpacked, please do the following:
Follow the anti-static precautions outlined in Section 3.1.
Make sure the packing box is facing upwards so the
PPC-51xxA-G41/WIDS-51xA-G41 does not fall out of the box.
Make sure all the components shown in Section 3.3 are present.