IAI America SEP-PT - Manual (Page 12)

6
Precautions for Operation
x Do not give any mechanical impact onto this touch panel teaching unit. Failure to do so may
cause a breakdown of the unit.
x Operate the machine securely holding this touch panel teaching unit body so that any
unnecessary tensile load is given to the cable.
*1 ERC3 is available to be connected only to MEC mode.
It cannot be connected in CON Mode.
x This touch panel teaching unit has been designed specially for our controller
ASEP/PSEP/DSEP, PMEC/AMEC or ERC3
*1
. Therefore, do not connect it to any other
machine. Failure to do so may cause a breakdown of the unit.
Caution