IAI America SEP-PT - Manual (Page 105)

99
5.2.2 Initial Setting
When power is input for the first time after the controller is delivered, the “Initialization” window
appears.
x Selecting Yes goes to the setting window in the operation pattern setting.
Select either “2-point Stop” or “3-point Stop”.
x If selecting No, the operation pattern will remain to “2-point Stop” that is initially set before
delivery.
The window is transferred to the Position Setting window.
Yes No
[Refer to “5.2.6 Position Setting”.]
[Refer to “5.2.5 Initial Setting”.]
Setting at the delivery from the factory
x 2-point Stop