Adaptec 48300 - Manual (Page 77)

Using the Command Line Utility ●
77
Syntax
hrconf restore
[noprompt]
Parameters
Controller# is the controller number
Filename is the name of the file to read the configuration from
noprompt: No prompt for confirmation.
Example
hrconf restore 1 c:\windows\hr2200 noprompt
Return values
SUCCESS: 0x00 indicates the command completed successfully
FAILURE: 0x01 indicates the command failed
BAD_PATH: 0xFF indicates that the path provided is incorrect
FAILURE: 0xFE indicates an error occurred writing the
configuration file
Command
hrconf romupdate
What it does
Updates the controller or enclosure firmware. The ROM image file
must be in the same directory prior to invoking hrconf.
Syntax
hrconf romupdate ROMUPDATE
[CONTROLLER]
Parameters
Controller# is the controller number
File Name is the relative or absolute path with filename
Example
hrconf romupdate 1 controller as4830.ufi