Adaptec 48300 - Manual (Page 56)

Using the Adaptec RAID Configuration Utility ●
56
SerialSelect Options
The following table lists the available and default settings for each
SerialSelect option and the descriptions of each option. The default
settings are appropriate for most systems and appear in bold type in the
table. Adaptec recommends that you do not change the settings.
SerialSelect Options
Available
Settings
Description
Controller Configuration
Runtime BIOS Enabled
Disabled
Disabled:Scan
bus Controls the state of the BIOS
at POST time. When Enabled,
the
HostRAID controller
BIOS allows the controller to
act as a bootable device.
Disabling the BIOS allows
another suitable
HostRAID
controller to act as the boot
device.
BBS Support Device
Controller When BBS support is set to
Device base, the system’s BIOS
will list each attached bootable
device to the
HostRAID
controller as individual entry.
When BBS support is set to
Controller base, the system’s
BIOS will only list the
HostRAID controller in the
system boot order. This is
useful in a multi-
HostRAID
controller configuration.
RAID Support Enabled
Disabled When there are active arrays in
the system, will not allow you
to Disable RAID support.
POST Banner Display Enabled
Disabled When Enabled, the Adaptec
banner, version, and copyright
is displayed. When Disabled,
the Adaptec banner, version,
and copyright is not displayed.