Managing arrays – Adaptec 48300 User Manual
Page 51
Using the Adaptec RAID Configuration Utility
●
51
Managing Arrays
Select the Manage Arrays option to perform these tasks:
●
●
Adding/Removing a Bootable Array
●
The following sections describe these operations in greater detail.
Viewing Array Properties
To view the properties of an existing array:
1
From the ACU menu, select Manage Arrays.
2
From the List of Arrays dialog box, select the array you want to view
then press Enter.
The Array Properties dialog box appears, showing detailed
information on the array. The physical disks associated with the
array are displayed here.
3
Press Esc to return to the previous menu.
Adding/Removing a Bootable Array
To make an array bootable:
1
From the Main menu, select Manage Arrays.
2
From the List of Arrays, select the array you want to make bootable,
then press Ctrl+B. An asterisk will appear next to the bootable array.
3
To make the array nonbootable, select it then press Ctrl+B. The
asterisk will disappear next to the array indicating that it is
nonbootable.