Version, Version67 – Adaptec 48300 User Manual
Page 67
Adaptec Flash Utility (AFU)
●
67
Example
The following example shows a typical system response after a verify
command has been performed:
A:\> AFU VERIFY /C 0
Adaptec Flash Utility V1.0-0 B1406
(c)Adaptec Inc. 1999–2005. All Rights Reserved.
Reading flash image file (Build 1406)
Controller #0: Adaptec ASC-48300
File: Checksum: 642C [VALID] (Build 1406)
File: Checksum: 642C [VALID] (Build 1406)
Verified Successfully
VERSION
The VERSION command displays version information about the flash
components on a HostRAID controller.
Command Syntax
The command syntax for the VERSION command is as follows:
AFU VERSION [/C
Command Switches
For details on the /C switch, see the
command on
.
Example
The following example displays version information about all
supported HostRAID controllers:
A:\> AFU VERSION /C 0
Adaptec Flash Utility V1.0-0 B1406
(c)Adaptec Inc. 1999–2005. All Rights Reserved.
Version Information for Controller #0 (Adaptec ASC-48300)
ROM: Build 1406 [VALID]