Adaptec 48300 - Manual (Page 76)

Using the Command Line Utility ●
76
Return values
controllers found: 0
SUCCESS: 0x00 successful termination
FAILURE: 0x01
Command
hrconf rescan
What it does
Enables the controller to check for the removal of any disk drives in the
ready state and to check for the connection of any new disk drives to the
controller. The command returns when the rescan is complete.
Syntax
hrconf rescan
Parameters
Controller# is the controller number
Example
hrconf rescan 1
Return values
SUCCESS: 0x00 indicates the command completed
FAILURE: 0x01 indicates the command failed
Command
hrconf restore
What it does
Restores the controller configuration by importing it’s configuration
settings from a specified file. Deletes the current configuration. The file
must have been saved through the BACKUP command from a
controller of the same type, same number, and type of physical drives
with same channels and device IDs. A reboot is required for the
configuration change to take effect.