IMP Pumps GHN(M)(D)basic(auto) & SANbasic 40-100 flanges - Manual (Page 13)

-13-
GB
Applies to safety instructions, the non-observance of which could damage the unit or
effect it’s functioning.
ATTENTION!
2.2 Personnel qualification
Installation should only be carried out by qualified personnel!
2.3 Dangers which could arise due to non-observance of safety
instructions
The non-observance of the safety instructions can lead to both danger to personnel and
also to possible harm to the pump itself. Failure to comply with safety instructions may
invalidate the rights of the user to any compensation or void our warranty.
In detail, non-observance can for example result in the following dangers:
- failure of important functions of the unit/installation,
- electric shock and mechanical injury hazards to workers.
2.4 Safety instructions for the User
Please follow all applicable safety instructions to avoid and prevent any accident. All
dangers due to electricity must be avoided. Please consult the Regulations of your local
Electricity Supply Company for details.
2.5 Inspection and installation
The user of the unit should ensure that all inspection or installation work is carried out
by authorised and qualified skilled personnel. The user must also make certain that they
have carefully studied the operating instructions. In principle all work on the unit should
only be carried out while it is stationary!
2.6 Unilateral modification and spare parts manufacturing
Modifications or changes to the unit should only be carried out after consultations with
the manufacturer. Original spare parts and accessories authorised by the manufacturer
are essential for compliance with safety requirements.The use of other parts can cause
damage to the equipment and invalidate any claims for warranty or compensation.
2.7 Unproven usage
The operating safety of the pump is only guaranteed provided that the unit is used in
accordance with the section 1. The limit values given in the data sheet should under no
circumstance be exceeded.
3. t
ranSport and Storage
ATTENTION!
Protect the unit from moisture. During transport the pump should not
be dropped or thrown. The pump must be used within the temperature
range -10°C to +50°C.