Netopia R2121 - Manual (Page 37)

Setting up your Router with the SmartStart Wizard 3-7
In most cases, this Smar tStar t configuration is all that you need to get your router up and running and
connected to the Internet. However, you may want to take advantage of additional features or special
configuration options available through the console-based configuration inter face. For detailed instructions, see
“Console-based Management” on page 6-1 .
Connection Profile Test screen. Smar tStar t tests your
connection profile by attempting to connect to your ISP.
To test the connection profile with your ISP, click Next.
While the test is running, Smar tStar t repor ts its progress
in a brief succession of dialog boxes as described below.
Available Line Test Progress screen. Smar tStar t tests to
see if the router can place calls on your telephone line.
While it is testing the connection, a dialog box is
displayed and the LEDs flash.
Connection Test Progress screen. Smar tStar t displays a
dialog box showing you that your connection profile is
being tested. If this test fails, check the physical
connections between the computer, the router, and the
wall jack or jacks. Check for errors in any manual entries
you made during the configuration process.
Final screen. When the connection tests successfully,
Smar tStar t displays a screen telling you that your
configuration is now complete.