Identify the connectors and attach the cables, Identify the connectors and attach the cables -2, 2telco 3 1 ethernet power – Netopia R2121 User Manual
Page 24
2-2 User’s Reference Guide
Windows and Macintosh, ZTerm terminal emulator software and NCSA Telnet 2.6 for Macintosh
You will need:
■
A Windows 95-based PC or a Macintosh with Ethernet connectivity for configuring the Netopia R2121. This
may be built-in Ethernet or an add-on card, with TCP/IP installed and configured. See
■
Two telephone lines, each with its own jack, or a single jack wired for two phone lines.
Identify the connectors and attach the cables
Identify the connectors and switches on the back panel and attach the necessar y Netopia Router cables.
1.
Connect the mini-DIN8 connector from the Power Adapter to the Power por t, and plug the other end into an
electrical outlet.
2.
Connect one end of one of the RJ-11 cables to the “Telco 1" por t, and the other end to one of your wall
outlets.
Auxiliary
Console
Phone 2
Phone 1
Power
Telco 1
Telco 2
Normal Uplink
Ethernet
1
8
POTS Ports
2
Telco
3
1
Ethernet
Power