Intermate 100 - Manual (Page 99)

Intermate100 and Intermate101 Print Server Administration Manual 99
IP Assignments for Initial Contact: Static IP Assignment Using “ARP and PING”
5 Ping the new IP address to store the address. Example:
ping 192.168.0.227
6 Pinging causes the Intermate1xx to reboot automatically.
Wait for the reboot to finish.
7 Connect and Login to the unit with the tool of your choice
a Choose [TCP/IP]
b Check to see that the BOOTP and RARP
protocols are disabled (this should happen
automatically when you use the ARP-PING
method).
c If you will are only using the IP address as a
stepping stone to DHCP, enable DHCP.
Otherwise, set the Subnet Mask and the
Gateway (if auto-rooting (RIP) is used, you can
leave the Gateway as 0.0.0.0)
8 Save your work and reboot. You can, of course, wait to
reboot until finishing other configurations you want to make.