Intermate 100 User Manual
Page 187
Intermate100 and Intermate101 Print Server Administration Manual
187
Configure [SNMP]: Load and Edit “Options” (Parameters)
11
If you have Private MIB version 1.1 or later, you can reboot
the Intermate1xx by setting the “Immediate” or “Controlled”
variable to the log-in user name, e.g. admin.
Alternatively, power the Intermate1xx Off and On (but wait
10 seconds after saving the “options” before powering Off).
12
Ping the Intermate1xx to verify that it is ready. This can be
done by right-clicking the connection in the submap window
and choosing “Ping.”. Press the “Start” button to ping a
single time. Repeat the pinging until the Intermate1xx
replies.
Tip:
The pinging can be set to be performed continuously by
checking the "Continuous Operation" feature in the
"Options" menu.