Intermate 100 - Manual (Page 76)

Intermate100 and Intermate101 Print Server Administration Manual 76
Configuration Using a Telnet Client: Menu Items and Settings
10.2. Menu Items and Settings
“Main Menu”
For the most part, each item corresponds to a configuration
page in the HTTP interface. For example:
1. General
2. Network.
...
The list ends with a display of the syntax for two kinds of save
(S and C) and for exiting the Telnet session (Q). There is a tim-
eout function that breaks the connection to the Intermate1xx
after about a minute of inactivity.
As indicated above, each item is numbered.
Select an item by typing the number of the item to the prompt >
and pressing the key.
Configuration Menus
When you have chosen an item on the main menu, you will be
presented with a sub-menu with a heading, a numbered list of
parameters and the message “R. Return to main menu”.
Examples of parameters in the sub-menu called “Raw Socket
Menu”:
1. TCP Port 1 <9100>
2. Use Logical Printer 1
3. TCP Port 2 <9100>
4. Use Logical Printer 2
...
As you can see in the example above, each parameter line fin-
ishes by showing the current setting in angled brackets.
Select the parameter you want to change by typing in the num-
ber and pressing the key.
You will then be shown the name of the parameter, the current
setting, and information on possible values which are either
chosen by item numbers or typed in. Pressing the key
finishes your data entry and returns you to the sub-menu (“pre-
vious menu”).