Intermate 100 - Manual (Page 9)

Intermate100 and Intermate101 Print Server Administration Manual 9
Introduction: Conventions Used in the Manual and Guides
1.3. Conventions Used in the Manual and Guides
The notation used is based on what you see in the HTTP-
based dialog for management and configuration.
This dialog has a left menu divided into group, sub-groups and
items. When we refer to such groups, sub-groups or items, we
use “double quotes” and connect the levels with a right angled
bracket >.
“Configuration > Input Control > LPR” is an example of
“Group > Sub-Group > Item”.
Many of the items open a configuration page. In descriptions of
how to do the configuration, the name of a configuration page
is put into [square brackets].
“Input Control” > [LPR] is an example of
“Group” > [Configuration Page].
The individual fields and buttons on a configuration page are
usually identified by putting the field name or button name in
“double quotes” unless the meaning is clear enough that no
special signs are needed.
are used in two ways:
•
• which is to be replaced by a specific
parameter value when you type in various kinds of
commands.