Intermate 100 User Manual
Page 242
Intermate100 and Intermate101 Print Server Administration Manual
242
Configuration Checklists: Overall Checklist
•
If you enable NDO, configure up to four network
printers / network destinations and make sure that you
do not enable power detection on “Output Control >
[Local Printer Parallel Port]”.
8
Configure logical printers as needed (see below, step
).
9
If you wish, configure one or more status monitoring aids.
You can choose from among e-mail, notification, SNMP and
enabling of the embedded IMCU agent.
10
Configure the services you want to use from among the
following possibilities—and use the
Service or Host Session” [page 243]
for each:
•
Raw Socket TCP Port (up to 4)
•
LPR queue (up to 8 configurable queues; there are also
4 non-configurable queues)
•
FTP
•
IPP (Internet Printing Protocol)
•
ThinPrint
•
IPDS (host-session)
•
TN5250E (host-sessions - up to 4)
•
TN3270E (host-session)
11
Remember that it is necessary to reboot in order to activate
new settings.
12
It is always a good idea to document your configurations by
printing the Main Status Pages.