HP PAVILION DX6500 - Manual (Page 63)

Display assembly
Description Spare part number
15.4-inch, WXGA, BrightView display assembly for use with computer models equipped with a
camera and microphones (includes camera, microphones, and WLAN transceivers and antenna
cables)
446481-001
15.4-inch, WXGA, BrightView display assembly for use with computer models equipped with
microphones (includes microphones and WLAN transceivers and antenna cables)
446482-001
Before removing the display assembly, follow these steps:
1 . Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2 . Disconnect all external devices connected to the computer.
3 . Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4 . Remove the battery (see Battery on page 36 ).
5 . Remove the memory/WLAN module compartment cover (see Memory module on page 43 ).
6 . Disconnect the wireless antenna cables from the WLAN module (see WLAN module on page 46 ).
7 . Remove the keyboard (see Keyboard on page 53 ).
8 . Remove the switch cover (see Switch cover on page 49 ).
Remove the display assembly:
1 . Close the computer and turn it upside down, with the rear panel toward you.
2 . Remove the Phillips PM2.5×8.0 screws that secure the display assembly to the computer.
3 . Turn the computer display-side up, with the front toward you.
4 . Open the computer to an upright position.
Component replacement procedures 55