HP PAVILION DX6500 - Manual (Page 59)

Speaker assembly
Description Spare part number
Speaker assembly (includes cables) 431447-001
Before removing the speaker assembly, follow these steps:
1 . Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2 . Disconnect all external devices connected to the computer.
3 . Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4 . Remove the battery (see Battery on page 36 ).
5 . Remove the switch cover (see Switch cover on page 49 ).
Remove the speaker assembly:
1 . Disconnect the speaker assembly cable (1) from the power button board.
2 . Remove the two Phillips PM2.5×2.0 broad-head screws (2) that secure the speaker assembly to the
switch cover.
3 . Remove the speaker assembly (3).
Reverse this procedure to install the speaker assembly.
Component replacement procedures 51