HP PAVILION DX6500 - Manual (Page 57)

Switch cover
Description Spare part number
Switch cover (includes LED board and cable) 446512-001
Before removing the switch cover, follow these steps:
1 . Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2 . Disconnect all external devices connected to the computer.
3 . Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4 . Remove the battery (see Battery on page 36 ).
Remove the switch cover:
1 . Remove the three Phillips PM2.5×8.0 screws that secure the switch cover to the computer.
2 . Turn the computer display-side up, with the front toward you.
3 . Open the computer as far as possible.
Component replacement procedures 49