HP COMBI 2180206H - Manual (Page 14)

Combi HP thermostatic mixer shower
where it is required i.e. bottom outlet for fixed
head, top outlet for a hose (fig.0).
Fit the inlet blanking trims on the underside of
the cover (fig.8).
Fit the outlet trim over the outlet adaptor and
slide the cover on (fig.9). Secure the cover
with two screws (fig.). locate the lugs on
the trim ring in the holes on the cover and twist
clockwise (fig.).
complete the fitting of your shower accessories.
T00248
Fig.8
N-004-A
Note: The flush-fitted shower valve comes
complete with a built-in pvc shroud. DO NOT
remove it. It is important when making good
the wall after installation, the plastering and
sealing must be made tight up to the shroud in
order to prevent ingress of water.