Specifications – Heath Zenith SL-6107 User Manual
Page 14

595-4514-13
-14-
This product is to be installed indoors only.
Electrical Input .......................................................... 120V, 60 Hz.
Fluorescent* Load ...................................... (2) 30 Watt minimum,
Up to 400 Watts Maximum
Rapid Start Ballast
Motor Load ............................................... Up to 1/8 HP Maximum
Incandescent .................................... Up to 500 Watts at 120VAC
On-Time .................... Adjustable approximately 5 sec. to 20 min.
Photocell Sensor ................. From full daylight to less than 1 FC.
Coverage ........................................... up to 15 ft. (4.6 m) at 150
°
,
up to 30 ft. (9.1 m) in front of the sensor
Specification subject to change without notice.
*Designed for use with standard 3 ft./30 watt and 4 ft./40 watt rapid-
start fluorescent tubes.
Not designed for use with compact
fluorescent bulbs.
Minimum of two tubes required.
Note: May not be used to operate
electronic or magnetic ballasts.
DESA Specialty Products™ reserves the right to discontinue prod-
ucts and to change specifications at any time without incurring any
obligation to incorporate new features in previously sold products.
SPECIFICATIONS