beautypg.com

Heath Zenith Professional Motion Sensor Quartz Security Light 5310 User Manual

Professional motion sensor quartz security light, Operation, Model 5310

background image

Professional Motion
Sensor Quartz Security
Light

Model 5310

Features

• Turns on lighting when motion is detected.
• Automatically turns lighting off.
• Photocell keeps the lighting off during daylight hours.
• LED indicates motion was sensed (day or night).

Cover

Plate

Sensor

3 Wire Nuts

6 Screws

(3 sizes)

Light Control

Cover Plate

Gasket

© 2007 HeathCo LLC

598-1323-01

Halogen

Bulb

Requirements

• The light control requires 120-volts AC.
• This fixture is designed for wall mounting only.
• If you want to use Manual Override, the control must

be wired through a switch.

Some codes require installation by a qualified
electrician.

• This product is intended for use with the enclosed

gasket and with a junction box marked for use in wet
locations.

• The backplate has knockouts so the sensor can be

mounted on most junction boxes.

• In some applications a universal adaptor plate may

be needed. Adaptors are available at Home Centers
and Electrical Supply Stores.

S-hook

OPERATION

* resets to Auto Mode at dawn.

TEST

Put the ON-TIME switch on the
bottom of the sensor in the TEST
position.

MANUAL MODE

... back on.

AUTO

1 Second OFF

then...

Move ON-TIME Switch

to 1, 5, or 10 minutes

Mode Switching Summary

Flip light switch

off for one second

then back on*

MANUAL MODE

AUTO

TEST

Note: When first turned on wait about 1

1

/

2

minutes for

the circuitry to calibrate.

Manual mode only works at night
because daylight returns the sensor
to AUTO.

Flip the light switch off for one second
then back on to toggle between AUTO
and MANUAL MODE.

Manual mode works only with the
ON-TIME switch in the 1, 5, or 10
position.

* If you get confused while switching modes, turn the

power off for one minute, then back on. After the cali-
bration time the control will be in the AUTO mode.

This package includes:

Put the ON-TIME switch in the 1, 5,
or 10 minute position.

Mode:

On-Time:

Works:

Day

Night

Test

5 Sec

x

x

Normal

1, 5, 10 min.

x

Manual

Until Dawn*

x

10 5 1

TEST

ON-TIME

ON-TIME

10 5 1 TEST