Heath Zenith Motion Sensing Coach Lights - Manual

This package includes:
• Lantern
• Easy to use Universal Mounting Bracket
• Mounting Hardware
• Wire Connectors
Requirements
• The light control requires 120 volts AC.
• If you want to use Manual Mode, the control
must be wired through a switch.
• Some codes require installation by a
qualified electrician.
Features
• Light comes on when motion is detected.
• Automatically turns light off.
• Dusk Accent lighting.
• Photocell keeps the light off during daylight
hours.
© 2007 HeathCo LLC 598-1207-01
MANUAL MODE
... back on.
1 Second
OFF then...
OPERATION
TEST
TEST 1 5 10 MIN
AUTO
TEST 1 5 10 MIN
D
ual
B
rite
® Motion
Sensing Coach Light
for Canadian Tire
Set the ON-TIME switch on
the bottom of the cover plate
to TEST and the D
ual
B
rite
®
switch OFF.
Set ON-TIME switch to
1, 5, or 10 minutes.
Manual mode only works at
night because daylight re-
turns the sensor to AUTO.
Flip the light switch off for
one second then back on to
toggle between AUTO and
MANUAL MODE.
Manual mode works only
with the ON-TIME switch in
the 1, 5, or 10 position.
* resets to Auto Mode at dawn.
Note: When first turned on wait about 1 1 /
2
minutes for the circuitry to calibrate.
Mode: On-Time Works: Day Night
Test 5 Seconds x x
Auto 1, 5, or 10 Min x
Manual To Dawn* x
Accent 3, 6 Hr, to Dawn x
Meets the ENERGY STAR ®
guidelines when D
ual
B
rite
®
function is off.