Heath Zenith Motion Sensing Porch Light SL-4303 - Manual

Features
• Light comes on when motion is detected.
• Automatically turns light off.
• Half power Accent lighting.
• Photocell keeps the light off during daylight
hours.
requirements
• The light control requires 120 volts AC.
• If you want to use Manual Mode, the control must
be wired through a switch.
• some electrical codes require installation by
a qualified electrician.
motion sensing Porch
Light
This package includes:
• Porch Light
• Easy to use Universal Mounting Bracket
• Mounting Hardware
• Wire Nuts
• Lens Shield
SL-4303
© 2008 HeathCo LLC 598-1348-00
Mode: On-Time Works: Day Night
test 5 Sec x x
auto/ 1, 5, or 10 min x
accent Off, 3, 6 Hr, to Dawn x
manual Until Dawn* x
OPeratiOn
Note: When first turned on wait about 1 1 /
2
minutes
for the circuitry to calibrate.
* resets to Auto Mode at dawn.
ON-TIME
test 1 5 10 MIN
test
Set ON-TIME switch to
1, 5, or 10 minutes.
autO
ON-TIME Switch at 1, 5, or
10 minutes
... back on.
1 Second OFF
then...
Manual mode only works at
night because daylight returns
the sensor to AUTO.
Flip the light switch off for one
second then back on to toggle
between AUTO and MANUAL
MODE.
Manual mode works only with
the ON-TIME switch in the 1,
5, or 10 position.
mOde switching summary
Flip light switch off
for one second then
back on*
* If you get confused while switching modes, turn
the power off for one minute, then back on. After
the calibration time the control will be in the AUTO
mode.
MANUAL MODE
AUTO
TEST
manuaL mOde
ON-TIME
TEST 1 5 10 min
Before installation, record the model number
listed inside the fixture. attach receipt in case
of possible warranty issues.
model number:
Set the ON-TIME switch
on the sensor to TEST.
Meets the ENERGY STAR ®
guidelines when D
ual
B
rite
® func-
tion is off.